Recent changes Random page
Computers
Gaming
History 
Movies
Politics
Television
see all...
More...

TECHNAXX Router-300 Wifi-N

Jump to: Navigation, search


TECHNAXX Router-300
TECHNAXX Router-300 Wifi-N-01.jpg
Wireless Router 300 Mbps

Homepage
Support

Router-300 Wifi-N

Wikipedia

wikipedia:Main Page

WikiDevi

wikidevi:Main Page

dd-wrt

WIP

OpenWRT

Status Unknown

Tomato

Status Unknown

TomatoUSB

Status Unknown

Gargoyle

Status Unknown

Specs[edit]

Platform

Serial Num. = ?
FCC ID = ?
Industry Canada ID = ?
CPU Type = Ralink RT3052
MIPS Rev = ?
CPU Speed = 380 MHz
Bus = ?
Flash Type = ?
Flash Chip = ?
Flash Size = 4 MB
Max Firmware Size = ?
RAM Size = 32 MB
RAM Chip = ?
nvram Size = ?
ETH chip1 = ?
Switch = ?
Port-based vlan = ?
802.1q vlan = ?
Ethernet Port Count = 1-10/100-WAN 4-10/100-LAN
Wired Standard = IEEE 802.3/3u
Ethernet interface OUI = ?
boot_wait = ?
bootloader = ?
Flash Card Socket/Type = ?
SD/MMC Mod Support = ?
Expansion IF types = ?
PoE = ?
Power = ?
Connector type/size = ?
LEDs/Color = ?
Size = ?
USB = ?
Serial Port = ?
JTAG Port = ?
Supported by TJTAG/Version = ?
Special Features = ?

Radio

Wireless Radio = ?
WLAN DSP processor = ?
Wireless interface OUI = ?
Antenna Connector Type = ?
MIMO status = ?
Wireless Standard = IEEE 802.11b/g/n
 802.11n = up to 300 Mbps
 802.11g = 6, 9, 12, 18, 24, 36, 48, 54 Mbps
 802.11b = 1, 2, 5.5, 11 Mbps
WiFi Operating Frequency = 2.4 - 2.4835 GHz
Radio cor_rev = ?
Radio Capabilities = ?

Other

Default IP address = ?
Default login user = ?
Default login password = ?
Default SSID = ?
OEM = ?
3rd Party Firmware Support = ?

Links of Interest[edit]

Flashing[edit]

Ambox-warning-blue-clip-art.jpg NOTE:

During configuration or flashing a device, the only things that should be hooked to the device is the computer and power.

Flashing DD-WRT[edit]

Flashing Tomato(USB)[edit]

Upgrading[edit]

Reverting[edit]

JTAG/Serial Info[edit]

JTAG[edit]

JTAG Pinouts[edit]

JTAG Recovery[edit]

Serial[edit]

Serial Pinouts[edit]

Hyper terminal Setup in Windows XP
In Windows XP, Click Start Button - All Programs - Accessories - 
   Communication - HyperTerminal
Enter a name for the connection, Click ok
Choose com port you adapter is plugged into, Click ok
Set:
 Bits per second = 115200
 Data Bits = 8
 Parity = none
 Stop bits = 1
 Flow control = none
Click ok
Click File - Save As, and select a place to save it to so you 
             don't have to enter the settings again.
Putty Setup in Windows XP
After installing putty, run it
 Serial line = The COM port your using for serial (ie. COM3)
 Speed = 115200
Click on Serial under Connection
 Serial line to connect to = same as above (Serial line)
 Speed (baud) = 115200
 Data bits = 8
 Stop bits = 1
 Parity = none
 Flow control = none
Click Session
 Enter a name for your connection under saved sessions
Click Save
Click Open


Serial Recovery[edit]

USB Info[edit]

vlan Info[edit]

Pictures[edit]

Notes[edit]

Same FCC IDs[edit]

Hardware Modification[edit]

Share this article: