Recent changes Random page
see all...

Netgear R6300 v2

Jump to: Navigation, search
Netgear R6300 001.jpg
R6300 Smart WiFi Router
Homepage Product page

Support page Downloads

Wikipedia Netgear
WikiDevi Netgear R6300 v2
3rd Party Firmware
dd-wrt Status Unknown
OpenWRT Status Unknown
Tomato Status Unknown
TomatoUSB Status Unknown
Gargoyle Status Unknown
FCCID PY313200227
ICID 4054A-13200227
CPU1 Type Broadcom BCM4708
CPU1 Speed 800 MHz
Flash1 Chip Samsung K9F1G08U0D x 1
Flash1 Size 128 MB
RAM1 Size 256 MB
RAM1 Chip brand? Model?
ETH chip1 brand? Model?
Switch Brand? Model?
Ethernet Port Count 1-10/100/1000-WAN,
Wired Standard IEEE 802.3/3u/3ab
Ethernet interface OUI none specified
Expansion IF types none specified
Power 12 VDC, 2.5 A
Connector type Barrel plug
Default IP address
Default login user admin
Default login password password
Manuf/OEM/ODM Foxconn
Availability yes
FCC approval date 26 March 2013
(Est.) release date 28 June 2013
ASIN B00F4LAWHG Question mark.png
Country of manuf China, Vietnam
Chip1 Broadcom BCM4360
Wireless interface OUI none specified
Antenna Connector Type U.FL
MIMO status 3x3:3
Wireless Standard IEEE 802.11a/n/ac
802.11ac up to 1000 Mbps
802.11n up to 450 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
Chip1 Broadcom BCM4331
Wireless interface OUI none specified
Antenna Connector Type U.FL
MIMO status 3x3:3
Wireless Standard IEEE 802.11b/g/n
802.11n up to 450 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Same FCC
Netgear AC1450 PY313200227

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

Near empty directory for the device on NETGEAR's FTP server

The FCC photos for this device show space for a single RAM chip.. which is a Samsung K4B1G1646G (128 MB) in those photos.

The FCC docs also show the device labeled as the NETGEAR AC1450.

This device is presumably using a BCM4708 series SoC.

The R6300v2 has a single USB 3.0 port and a single USB 2.0 port.

Wi-Fi Certified (alt.) (as of 07/02/2013)

Additional Chips: 2.4GHz Power Amplifier IC;Skyworks;SE2528L;SiGe, 2528L, 215DC;3
                  5GHz Power Amplifier IC;Skyworks;SE5003L1;5003L1, 218BN, 1219 MY;3

Links of Interest[edit]




JTAG/Serial Info[edit]


Serial Pinouts[edit]


(TX)  (RX) (GND) (3.3V)
pin4  pin3  pin2  pin1
Hyper terminal Setup in Windows XP
In Windows XP, Click Start Button - All Programs - Accessories - 
   Communication - HyperTerminal
Enter a name for the connection, Click ok
Choose com port you adapter is plugged into, Click ok
 Bits per second = 115200
 Data Bits = 8
 Parity = none
 Stop bits = 1
 Flow control = none
Click ok
Click File - Save As, and select a place to save it to so you 
             don't have to enter the settings again.
Putty Setup in Windows XP
After installing putty, run it
 Serial line = The COM port your using for serial (ie. COM3)
 Speed = 115200
Click on Serial under Connection
 Serial line to connect to = same as above (Serial line)
 Speed (baud) = 115200
 Data bits = 8
 Stop bits = 1
 Parity = none
 Flow control = none
Click Session
 Enter a name for your connection under saved sessions
Click Save
Click Open

Serial Recovery[edit]

USB Info[edit]

vlan Info[edit]



Hardware Modification[edit]

Share this article: