Recent changes Random page
Computers
Gaming
History 
Movies
Politics
Television
see all...
More...

Belkin (My Essentials) ME1004-R

Jump to: Navigation, search


Belkin (My Essentials) ME1004-R
Belkin My Essentials ME1004-R 01.jpg
Wireless Cable/DSL Router

Homepage
Support


Support page

Wikipedia

Belkin

WikiDevi

Belkin ME1004-R

dd-wrt

Incompatible

OpenWRT

Status Unknown

Tomato

Status Unknown

TomatoUSB

Status Unknown

Gargoyle

Status Unknown

Internal photos on the DD-WRT forums (of the F5D7230-4 v6, which is identical)

The power adapter that came with the unit is an OEM AD-041A5. ID/OD measurements are approximate.

Specs[edit]

Platform

Serial Num. = ?
FCC ID = K7SF5D7230C
Industry Canada ID = 3623A-F5D7230C
CPU Type = Marvell 88W8510
MIPS Rev = ?
CPU Speed = ?
Bus = ?
Flash Type = ?
Flash Chip = Macronix 29LV800CTTC-70G
Flash Size = 1MB
Max Firmware Size = ?
RAM Size = 8 MB
RAM Chip = EtronTech EM638165TS-6G
nvram Size = ?
ETH chip1 = ?
Switch = ?
Port-based vlan = ?
802.1q vlan = ?
Ethernet Port Count = ?
Wired Standard = IEEE 802.3?
Ethernet interface OUI = 00:17:3F
boot_wait = ?
bootloader = ?
Flash Card Socket/Type = ?
SD/MMC Mod Support = ?
Expansion IF types = ?
PoE = ?
Power = 4.5 VDC, 1.5 A
Connector type/size = Barrel plug, 1.5 mm (ID), 4.2 mm (OD), ? mm (LEN)
LEDs/Color = ?
Size = ?
USB = ?
Serial Port = ?
JTAG Port = ?
Supported by TJTAG/Version = ?
Special Features = ?

Radio

Wireless Radio = Marvell 88W8010
WLAN DSP processor = Marvell 88W8510
Wireless interface OUI = 00:17:3F
Antenna Connector Type = none
MIMO status = ?
Wireless Standard = IEEE 802.11b/g
 802.11g = 6, 9, 12, 18, 24, 36, 48, 54 Mbps
 802.11b = 1, 2, 5.5, 11 Mbps
WiFi Operating Frequency = 2.4 GHz
Radio cor_rev = ?
Radio Capabilities = ?

Other

Default IP address = ?
Default login user = ?
Default login password = ?
Default SSID = ?
OEM/ODM = SerComm (W300A-1.0MM)
3rd Party Firmware Support = ?

Links of Interest[edit]

Flashing[edit]

Ambox-warning-blue-clip-art.jpg NOTE:

During configuration or flashing a device, the only things that should be hooked to the device is the computer and power.

Flashing DD-WRT[edit]

Flashing Tomato(USB)[edit]

Upgrading[edit]

Reverting[edit]

JTAG/Serial Info[edit]

JTAG[edit]

JTAG Pinouts[edit]

JTAG Recovery[edit]

Serial[edit]

Serial Pinouts[edit]

Hyper terminal Setup in Windows XP
In Windows XP, Click Start Button - All Programs - Accessories - 
   Communication - HyperTerminal
Enter a name for the connection, Click ok
Choose com port you adapter is plugged into, Click ok
Set:
 Bits per second = 115200
 Data Bits = 8
 Parity = none
 Stop bits = 1
 Flow control = none
Click ok
Click File - Save As, and select a place to save it to so you 
             don't have to enter the settings again.
Putty Setup in Windows XP
After installing putty, run it
 Serial line = The COM port your using for serial (ie. COM3)
 Speed = 115200
Click on Serial under Connection
 Serial line to connect to = same as above (Serial line)
 Speed (baud) = 115200
 Data bits = 8
 Stop bits = 1
 Parity = none
 Flow control = none
Click Session
 Enter a name for your connection under saved sessions
Click Save
Click Open


Serial Recovery[edit]

USB Info[edit]

vlan Info[edit]

Pictures[edit]

FCCID

Notes[edit]

Same FCC IDs[edit]

Device FCCID's
Belkin F5D7230-4 6.0 K7SF5D7230C

Hardware Modification[edit]

Share this article: